Auto Logic Automation

1769-L33ER Allen Bradley CompactLogix 1 MB ENet Controller 

CompactLogix 5370 controllers provide scalable controller solutions to address a wide variety of applications. All CompactLogix 5370 controllers provide the following functionality: • Two Ethernet ports • One USB port • Support for local expansion modules • Control of local and distributed I/O modules • Use of 1784-SD1 or 1784-SD2 Secure Digital (SD) card for nonvolatile memory • A battery is no longer necessary because of the internal energy-storage solution Some CompactLogix 5370 controllers provide the following functionality: • Built-in power supply • Some combination of embedded digital, analog, and highspeed counter modules • Support for Integrated Motion over an EtherNet/IP™ network • Access to DeviceNet® networks

Additional Information:

• Delivery Time: Ready Stock

1769-OF4CI Allen Bradley CompactLogix 4 Pt A/O Current Module.............................................

Additional Information:

• Delivery Time: Ready stock

1762-IF4 Allen Bradley MicroLogix 4 Point Analog Input Module MicroLogix 1200 4-channel Voltage/Current Analog Input Module Installation Instructions Recommended cable Belden 8761 (shielded) Vendor ID code 1 Product type code 10 Product code 67 Wire size See Wire Size and Terminal Screw Torque Wiring category(4) 2 – on signal ports Pilot duty rating Not rated Enclosure type rating IP20 North American temp code T3C (1) The overrange or underrange flag comes on when the normal operating range (over/under) is exceeded. The module continues to convert the analog input up to the maximum full-scale range. (2) Repeatability is the ability of the input module to register the same reading in successive measurements for the same input signal. (3) Rated working voltage is the maximum continuous voltage that can be applied at the terminals with respect to earth ground. (4) Use this Conductor Category information for planning conductor routing. See the Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1. Environmental Specifications Attribute Value Temperature, operating IEC 60068-2-1 (Test Ad, Operating Cold), IEC 60068-2-2 (Test Bd, Operating Dry Heat), IEC 60068-2-14 (Test Nb, Operating Thermal Shock): -20…+65 °C (-4…+149 °F) Temperature, nonoperating IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold), IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat), IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock): -40…+85 °C (-40…+185 °F) Relative humidity IEC 60068-2-30 (Test Db, Unpackaged Damp Heat): 5…95% noncondensing Vibration IEC 60068-2-6 (Test Fc, Operating): 5 g @ 10…500 Hz Altitude, operating, max 2000 m (6562 ft) Shock, operating, panel mounted IEC 60068-2-27 (Test Ea, Unpackaged Shock): 30 g Shock, nonoperating IEC 60068-2-27 (Test Ea, Unpackaged Shock): 50 g – Panel mounted 40 g – DIN rail mou

Additional Information:

• Delivery Time: Ready Stock

1769-L19ER-BB1B Allen Bradley CompactLogix L19 1MB Ctlr......................................................

Additional Information:

• Delivery Time: Ready Stock

1766-L32BWAA Allen Bradley MicroLogix 1400 32 Point Controller The MicroLogix 1400 programmable controller contains a power supply, input and output circuits, a processor, an isolated combination RS-232/RS-485 communication port, an Ethernet port, and a non-isolated RS-232 communication port. Each controller supports 32 discrete I/O points (20 digital inputs, 12 discrete outputs) and 6 analog I/O points (4 analog inputs and 2 analog outputs: 1766-L32BWAA, 1766-L32AWAA, and 1766-L32BXBA only).

Additional Information:

• Delivery Time: Ready Stock

25A-D017N114 PowerFlex 523 7.5kW (10Hp) AC Drive
Establish in 2023-08-29 Auto Logic Automation, your trusted source for cutting-edge industrial automation solutions. As a premier dealer specializing in PLC (Programmable Logic Controller) and VFD (Variable Frequency Drive).

25B-D013N114 PowerFlex 525 5.5kW (7.5Hp) AC Drive
Establish in 2023-08-29 Auto Logic Automation, your trusted source for cutting-edge industrial automation solutions. As a premier dealer specializing in PLC (Programmable Logic Controller) and VFD (Variable Frequency Drive).

PowerFlex 525 1.5kW AC DriveProduct Overview The PowerFlex® 520-series AC drive delivers an innovative design that is remarkably versatile and can accommodate systems ranging from standalone machines to simple system integration. The PowerFlex 523 drive provides general-purpose control for applications that range up to 30 HP and 22 kW. The PowerFlex 525 drive provides maximum flexibility and performance ranging up to 30 HP and 22 kW. By combining various motor control options, communications, energy savings, and standard safety features in a cost-effective drive, the PowerFlex 520-series drive is suitable for a wide array of applications. Maximize your system performance and productivity by taking advantage of the following key features offered in a PowerFlex 520-series drive. PowerFlex 520-series AC Drives Feature Modular Design • Detachable control module and power module allow simultaneous configuration and installation. • Each drive has a standard control module that is used across the entire power range. • MainsFree configuration allows you to simply connect your control module to a PC with a standard USB cable and quickly upload, download, and update the drive with new settings. • Support for accessory cards without affecting the footprint. (PowerFlex 523 drives support one, PowerFlex 525 drives support two)

Product Overview PowerFlex® 527 AC drives are designed to be used with an Allen-Bradley® Logix Programmable Automation Controller (PAC). Ideal for machines that can benefit from the same drive configuration experience for both servo and AC drives, the PowerFlex 527 drive features a built-in dual-port for EtherNet/IP™ and safety over the network. The PowerFlex 527 drive provides maximum flexibility and performance ranging up to 30 HP and 22 kW. Designed to connect and operate only with the ControlLogix® 1756-L7x, GuardLogix® 1756-L7xS, and CompactLogix® 5370 controllers and Studio 5000 Logix Designer® application. The PowerFlex 527 is programmed with the embedded motion instructions within Studio 5000®, these are the same instructions that are used for Allen-Bradley Kinetix® servo drives. This streamlined approach provides a common user experience and just one software package to learn and use. The commonality and use of consolidated integration tools helps save valuable engineering time. Maximize your system performance and productivity by taking advantage of the following key features that are offered in a PowerFlex 527 drive. PowerFlex 527 AC Drives Feature Design • Designed to be used exclusively with Allen-Bradley Logix controllers. • Designed for machine applications – such as pumps, fans, and in-feed and out-feed conveyors – that need speed control for induction motors. • Logix integration helps deliver a high level of motor coordination. • Built-in dual-port EtherNet/IP supports multiple network topologies and Device Level Ring functionality. • Built-in hardwired Safe Torque Off. SIL 3 / PLe Cat 3. • Integrated Safety – controller-based safety delivered via EtherNet/IP. SIL 3 / PLe Cat 3. • Reduce your spare parts with a standard control module that can be used across the entire power range. • Support for an incremental encoder accessory card without affecting footprint. Packaging and Mounting • Installation can be quick and easy using the DIN rail mounting feature on A, B, and C frame drives. Panel mounting is also available, providing added flexibility. • Zero Stacking is allowed for ambient temperatures up to 45 °C (113 °F), saving valuable panel space. • Integral filtering is available on all 200V and 400V ratings, providing a cost-effective means of meeting EN61800-3 Category C2 and C3 EMC

Additional Information:

• Item Code: 112
• Production Capacity: 100000000
• Delivery Time: Ready

22F-B8P0N103 PowerFlex 4M- 1.5 kW (2 HP) AC DriveThe purpose of this manual is to provide you with the basic information needed to install, start-up and troubleshoot the PowerFlex® 4M adjustable frequency AC drive. This manual is intended for qualified personnel. You must be able to program and operate adjustable frequency AC drive devices. In addition, you must have an understanding of the parameter settings and functions. The following manuals are recommended for general drive information: Who Should Use this Manual? Reference Materials Resource Description PowerFlex AC Drive Performance Specifications per Ecodesign Regulation (EU) 2019/1781 and UK SI 2021 No. 745 Technical Data, publication PFLEX-TD003 Provides specifications per Ecodesign Regulation (EU) 2019/1781 and UK SI 2021 No. 745, including efficiency class. Guarding Against Electrostatic Damage (ESD) Service Bulletin, publication 8000-4.5.2 Provides information on causes of ESD, and how you can guard against its effects. Wiring and Grounding for Pulse Width Modulated (PWM) AC Drives Installation Instructions, publication DRIVES-IN001 Provides basic information that is needed to wire and ground PWM AC drives properly. Preventive Maintenance Checklist of Industrial Control and Drive System Equipment Technical Data, publication DRIVES-TD001 Provides checklist on performing preventive maintenance for industrial control and drive system equipment. Safety Guidelines for the Application, Installation, and Maintenance of Solid-State Control Installation Instructions, publication SGI-1.1 Provide general guidelines for the application, installation, and maintenance of solid-state control in the form of individual devices or packaged assemblies incorporating solid-state components. Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1 Provides general guidelines for insta

Additional Information:

• Item Code: 1125
• Production Capacity: 100000
• Delivery Time: Ready

1762-OW16 Allen Bradley MicroLogix 16 Point Relay Output Module....................................................

Additional Information:

• Item Code: 1762-SERIES
• Production Capacity: 100000
• Delivery Time: Ready Stock